Bentley Azure Cabriolet roof Hydraulic hose.

This is a direct replacement hydraulic hose for the Bentley Azure first generation 1995-2003.

This kit has a very extensive hydraulic system which uses a total of 26 hoses.

On the old style pump all the hoses exit the pump from the front via a metal plate and are held in place with a small clip.

Also on these models some hoses use female nuts to secure the hoses to the rams and on other hoses a small push in fitting is used secured via a small cir clip.

The image shows a straight ram fitting but quite often they are 45 and 90 degree, we stock all 3 types.

 

As all the hoses are of differing lengths i will contact you on receipt of an order to ascertain which you require.

Bentley Azure. First generation 1995-2003

Bentley Azure. First gen, Hydraulic roof hose (single)

ID Numbers
Bentley Azure. First generation 1995-2003
849.99 GBP

Bentley Azure. First gen, Hydraulic roof hose (complete kit)

Bentley Continental SC Cabriolet Roof Hydraulic Hose.

 

This is a direct replacement hydraulic hose for the Bentley Continental SC 1998-2000

This is a slightly different convertible as the roof comes off as one piece instead of retracting back into the vehicle.

It does however require a series of locking cylinders, which inturn require hydraulic hoses to operate.

It has 9 hoses all using a different combinations of fittings.

.

The image shows just one combination, your hose may have differing ends.

 

Bentley Continental SC

Bentley Continental SC 1998-2000

ID Letters

Rolls Royce Corniche III / Bentley Continental 1990/1991

This is a direct replacement hydraulic hose for the Rolls Royce Corniche III and Bentley Continental 1900-1991

The kit only has 6 hoses, each terminating with a straight male fitting.

 

 

RR Corniche III / Bentley Continental
329.99 GBP

Rolls Royce Corniche III / Bentley Continental 1990/1991

Rolls Royce Corniche IV 1994/1995

This is Direct Replacement Hydraulic hose kit for the Rolls Royce Corniche IV 1994/1995.

This kit has a total of 12 hoses each terminating in a male thread.

Some hoses have straight ends while others have a 90 degree.

Rolls Royce Corniche IV

Rolls Royce Corniche IV 1994/1995

ID Numbers

Rolls Royce Corniche V Cabriolet Roof Hydraulic Hose.

This is a direct replacement hydraulic hose for the Rolls Royce Corniche V.

This kit has a very extensive hydraulic system which uses a total of 26 hoses.

On the old style pump all the hoses exit the pump from the front via a metal plate and are held in place with a small clip.

Also on this model some hoses use female nuts to secure the hoses to the rams and on other hoses a small push in fitting is used secured via a small cir clip.

The image shows a straight ram fitting but quite often they are 45 and 90 degree, we stock all 3 types.

 

As all the hoses are of differing lengths i will contact you on receipt of an order to ascertain which you require.

Rolls Royce Corniche V
849.99 GBP

Rolls Royce Corniche V. Hydraulic roof hose (complete kit)